The new Mercedes-Benz S-Class or September 2016 debut

Recently, the new Mercedes-Benz S-class undisguised spy photos captured by the foreign media, the new models front air grille and headlight internal structure has been slightly adjusted. According to foreign media sources, the car is expected to debut at the Paris Motor Show in September 2016.

Mercedes-Benz S-Class-1

From this exposure without camouflage spy photos, the new S-Class in appearance basic continuation of the current model design, the mainly change focus on headlight group and front air grille. Which the car headlight internal structure use the new design, the LED daytime running light and LED turn signal lamps position move to lower of lamp group, at the same time, a group of camouflaged the new S-class light group structure previous exposure is difference with this exposure models, that may be the difference between high and low equipped version models. In addition, the new car front air intake grille inside also use three sets design twin banner styling, compared to the current model will be more three-dimensional.

In interior, from the previous exposure of the spy photos, the new S-Class is equipped with a new shape three-spoke steering wheel, compared to the current two-spoke design is more dynamic, while the new car or will be upgraded for the entertainment system. Currently the information about the car power is relatively limited, we will continue to focus.

In test, the new Mercedes-Benz S-Class can still use the new generation MB STAR C4 to diagnosis all the system. Mercedes Benz MB Star Diagnose C4 (SD Connect) With 9.2015 latest xentry, das, EPC,WIS software is the latest one with wireless on market for all current and new coming MB vehicles than MB STAR C3.

More related topics

ABRITES FVDI Commander Tool With All Softwares Old version

Audi A6 allroad Sport details small changes

The new Focus RS into environmental protection directory

Advertisements

Mercedes-Benz S320 electric windows sometimes can not lift

Symptom: a Mercedes-Benz S320 sedan traveled 21,000 km, the car electric windows sometimes can not lift. The owners describe the vehicle electric windows often do not work.

1996 Mercedes Benz S320

Diagnosis: test the car, not fault. Connect with MB Star C3 to diagnosis, it shows network system failure. According to electric windows system control principle can known, the car electric windows is control by CAN- BUS, then diagnosis the CAN- BUS system, but the test results were normal. For this reason, the maintenance staff asked in detail about the situation of the car when fault occurs. According to the driver to reflect the car failure was more frequent, and always appears during driving, but does not appear when parking. For a long road test, use Mercedes Benz MB Compact3 test the CAN-H and CAN-L waveforms, has serious clutter, but electric window system able to work properly. This is occasional failures, mostly due to the line poor contact. Collated the CAN data bus, not found unusual. Then again to check the electric control unit harness of four doors, found right rear door electronic control unit connector rear CAN-H line (orange / green) is close circuit.

Troubleshooting: after handling the harness test the car, electric windows work back to normal. After two weeks, the fault does not occur again. So far, troubleshooting.

More related topics

Delphi DS150E VCI Bluetooth Scanner For Car And Truck

Peugeot 307 car engine flameout when hot car

Newest Delphi DS150E VCI Scanner Plus Full Set Car Cables

High Quality Ford/Mazda Incode Tool From Go2obd

Ford/Mazda Incode Tool,the engine computer synchronization, replacement of the control module needs INCODE. Ford & Mazda CODE device support both outcode and incode. Normal tool for example T300, SBB only help read out OUTCODE but don’t support INCODE input.

Ford Mazda Incode Tool

Description:

Ford Mazda key match, the engine computer synchronization, replacement of the control module needs INCODE.

Function:

1.VCM Diagnostic software or OEM Key Programming Machine will show the OUTCODE on-screen.
2.In this time, enter the INCODE on the VCM or OEM Tools, before continuing to the corresponding function.
3.Just connect the F&M CODE between the Diagnosis equipment or OEM Key Programming Machine into your car’s.
4.Tools Support: VCM/T300/AD100/SBB … and so on, as long as the device prompts you OUTCODE, FMCODE will automatically display INCODE.
5.Ford&MCODE device supports all CANBUS models, high-speed CAN, be able to support low-speed CAN)
(The old car does not support K line communication, we can provide INCODE).

The way to get INCONDE:

A: Requesting PATS INCODE from the Agent
B: With foreign code calculator
(Error INCODE you getting is high, there are number of restrictions, the purchase price is expensive)

This Ford/Mazda Incode car key programmer tool can be bought through go2obd.net for 165 USD, we acts as a reliable car scanner devices in China for 5 years. We are proving auto diagnostic tools at low price but in high quality.

More related topics

LAUNCH CR-HD Heavy Duty Code Reader

LAUNCH CRESETTER SERVICE LIGHT RESET TOOL Original

LAUNCH X431 Diagun III 3 Scanner Original

FGTECH Galletto 2 Master Tunning Tool Plus BDM Adaptors

FGTech Galletto 2 Master BDM-TriCore-OBD Plus BDM adaptors is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode Tricore, checksum. This item cannot only work as FGTech Galletto 2 Master, but can also work for BDM-TriCore-OBD. This FGTECH Galletto 2 is with BDM adaptors make job so easy.

FGTECH Galletto 2 Master Tunning Tool Plus BDM Adaptors

FGTECH GALLETTO 2 MASTER ( BDM-TriCore-OBD ) V11.9. Software version is V52.

(MPC5xx – EDC17 – Infineon TriCore – ST10Fxx – OBD2 (K-CAN)

FGTech Galletto 2 Master this new system developed with high-speed USB technology is the fastest and most secure product on the market, it is easy to install and use by anyone. Our system comes furnished complete with all Car, Truck, Motorbyke, Marine, BDM MPCxx , BDM Boot Mode Tricore, checksum.

The interface works with this Operating System:

Windows 2000

Windows XP – 32 bit / 64 bit

Windows Vista 32 bit / 64 bit

Windows 7- 32 bit / 64 bit

Software: 2012 version

Software Language: Italiano, English, Deutsch, Francais, Espanol, Portugues, Czech, Turkish

Packing:

New version main interface

ECU cable for TriCore boot

Adapter for BDM to CMD with bdm cables

BDM adapters (3 pcs )

BDM connectors ( 6 pcs )

Power cable ( 2 pcs )

OBD2 cable

USB cable (1.5meter)

CD (2012 version SW -MASTER, documents pdf, pictures, etc

About Us

Go2obd.net – Professional Auto Diagnostic Tools Supplier. Our main products includes LAUNCH X431,Autel Scanner, OEM OBD Scan Tool, Car Key Program Tool, ECU Tunning Tool and so on. If you have any problems, don’t hesitate to contact us, send email to oliviatang099@gmail.com. We acts as a reliable car scanner devices in China for 5 years. We are proving auto diagnostic tools at low price but in high quality.

More related topics

Mercedes Benz MB Star Diagnose C4 ( SD Connect ) With Latest Xentry

Mercedes Benz MB Star C3 Diagnosis With Latest Software

Renault CAN Clip Diagnostic Tool Plus Newest Software